Kann den code nicht einbauen weils die zeile nicht gibt

Du hast Probleme beim Einbau oder bei der Benutzung eines Mods? In diesem Forum bist du richtig.
Forumsregeln
phpBB 2.0 hat das Ende seiner Lebenszeit überschritten
phpBB 2.0 wird nicht mehr aktiv unterstützt. Insbesondere werden - auch bei Sicherheitslücken - keine Patches mehr bereitgestellt. Der Einsatz von phpBB 2.0 erfolgt daher auf eigene Gefahr. Wir empfehlen einen Umstieg auf phpBB 3.0, welches aktiv weiterentwickelt wird und für welches regelmäßig Updates zur Verfügung gestellt werden.
Antworten
Benutzeravatar
franticfreak
Mitglied
Beiträge: 464
Registriert: 14.02.2005 22:18
Kontaktdaten:

Kann den code nicht einbauen weils die zeile nicht gibt

Beitrag von franticfreak »

Hi ich muss den code hier

if ( $is_auth_ary[$forum_id]['auth_view'] )

finden

nur gibts ihn nicht

guckt selber
<?php
/***************************************************************************
* auth.php
* -------------------
* begin : Saturday, Feb 13, 2001
* copyright : (C) 2001 The phpBB Group
* email : support@phpbb.com
*
* $Id: auth.php,v 1.37.2.5 2004/03/01 16:49:03 psotfx Exp $
*
*
***************************************************************************/

/***************************************************************************
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
***************************************************************************/

/*
$type's accepted (pre-pend with AUTH_):
VIEW, READ, POST, REPLY, EDIT, DELETE, STICKY, ANNOUNCE, VOTE, POLLCREATE

Possible options ($type/forum_id combinations):

* If you include a type and forum_id then a specific lookup will be done and
the single result returned

* If you set type to AUTH_ALL and specify a forum_id an array of all auth types
will be returned

* If you provide a forum_id a specific lookup on that forum will be done

* If you set forum_id to AUTH_LIST_ALL and specify a type an array listing the
results for all forums will be returned

* If you set forum_id to AUTH_LIST_ALL and type to AUTH_ALL a multidimensional
array containing the auth permissions for all types and all forums for that
user is returned

All results are returned as associative arrays, even when a single auth type is
specified.

If available you can send an array (either one or two dimensional) containing the
forum auth levels, this will prevent the auth function having to do its own
lookup
*/
function auth($type, $forum_id, $userdata, $f_access = '')
{
global $db, $lang; // start item auths
$itemarray = explode('ß', str_replace("Þ", "", $userdata['user_items']));

$sql = "select name, accessforum from phpbb_shopitems where accessforum != '0'";
if ( !($result = $db->sql_query($sql)) ) { message_die(GENERAL_MESSAGE, "Database Connection Error!<br>".mysql_error()); }
$num_rows = mysql_num_rows($result);

$itemformaccess = array();
for ($x = 0; $x < $num_rows; $x++)
{
$row = mysql_fetch_array($result);
if (in_array($row['name'], $itemarray))
{
$itemformaccess[] = $row['accessforum'];
}
}

switch( $type )
{
case AUTH_ALL:
$a_sql = 'a.auth_view, a.auth_read, a.auth_post, a.auth_reply, a.auth_edit, a.auth_delete, a.auth_sticky, a.auth_announce, a.auth_vote, a.auth_pollcreate';
$auth_fields = array('auth_view', 'auth_read', 'auth_post', 'auth_reply', 'auth_edit', 'auth_delete', 'auth_sticky', 'auth_announce', 'auth_vote', 'auth_pollcreate');
break;

case AUTH_VIEW:
$a_sql = 'a.auth_view';
$auth_fields = array('auth_view');
break;

case AUTH_READ:
$a_sql = 'a.auth_read';
$auth_fields = array('auth_read');
break;
case AUTH_POST:
$a_sql = 'a.auth_post';
$auth_fields = array('auth_post');
break;
case AUTH_REPLY:
$a_sql = 'a.auth_reply';
$auth_fields = array('auth_reply');
break;
case AUTH_EDIT:
$a_sql = 'a.auth_edit';
$auth_fields = array('auth_edit');
break;
case AUTH_DELETE:
$a_sql = 'a.auth_delete';
$auth_fields = array('auth_delete');
break;

case AUTH_ANNOUNCE:
$a_sql = 'a.auth_announce';
$auth_fields = array('auth_announce');
break;
case AUTH_STICKY:
$a_sql = 'a.auth_sticky';
$auth_fields = array('auth_sticky');
break;

case AUTH_POLLCREATE:
$a_sql = 'a.auth_pollcreate';
$auth_fields = array('auth_pollcreate');
break;
case AUTH_VOTE:
$a_sql = 'a.auth_vote';
$auth_fields = array('auth_vote');
break;
case AUTH_ATTACH:
break;

default:
break;
}

//
// If f_access has been passed, or auth is needed to return an array of forums
// then we need to pull the auth information on the given forum (or all forums)
//
if ( empty($f_access) )
{
$forum_match_sql = ( $forum_id != AUTH_LIST_ALL ) ? "WHERE a.forum_id = $forum_id" : '';

$sql = "SELECT a.forum_id, $a_sql
FROM " . FORUMS_TABLE . " a
$forum_match_sql";
if ( !($result = $db->sql_query($sql)) )
{
message_die(GENERAL_ERROR, 'Failed obtaining forum access control lists', '', __LINE__, __FILE__, $sql);
}

$sql_fetchrow = ( $forum_id != AUTH_LIST_ALL ) ? 'sql_fetchrow' : 'sql_fetchrowset';

if ( !($f_access = $db->$sql_fetchrow($result)) )
{
$db->sql_freeresult($result);
return array();
}
$db->sql_freeresult($result);
}

//
// If the user isn't logged on then all we need do is check if the forum
// has the type set to ALL, if yes they are good to go, if not then they
// are denied access
//
$u_access = array();
if ( $userdata['session_logged_in'] )
{
$forum_match_sql = ( $forum_id != AUTH_LIST_ALL ) ? "AND a.forum_id = $forum_id" : '';

$sql = "SELECT a.forum_id, $a_sql, a.auth_mod
FROM " . AUTH_ACCESS_TABLE . " a, " . USER_GROUP_TABLE . " ug
WHERE ug.user_id = ".$userdata['user_id']. "
AND ug.user_pending = 0
AND a.group_id = ug.group_id
$forum_match_sql";
if ( !($result = $db->sql_query($sql)) )
{
message_die(GENERAL_ERROR, 'Failed obtaining forum access control lists', '', __LINE__, __FILE__, $sql);
}

if ( $row = $db->sql_fetchrow($result) )
{
do
{
if ( $forum_id != AUTH_LIST_ALL)
{
$u_access[] = $row;
}
else
{
$u_access[$row['forum_id']][] = $row;
}
}
while( $row = $db->sql_fetchrow($result) );
}
$db->sql_freeresult($result);
}

$is_admin = ( $userdata['user_level'] == ADMIN && $userdata['session_logged_in'] ) ? TRUE : 0;

$auth_user = array();
for($i = 0; $i < count($auth_fields); $i++)
{
$key = $auth_fields[$i];

//
// If the user is logged on and the forum type is either ALL or REG then the user has access
//
// If the type if ACL, MOD or ADMIN then we need to see if the user has specific permissions
// to do whatever it is they want to do ... to do this we pull relevant information for the
// user (and any groups they belong to)
//
// Now we compare the users access level against the forums. We assume here that a moderator
// and admin automatically have access to an ACL forum, similarly we assume admins meet an
// auth requirement of MOD
//
if ( $forum_id != AUTH_LIST_ALL )
{
$value = $f_access[$key]; if (in_array($forum_id, $itemformaccess) && (!in_array("auth_sticky",$auth_fields) && !in_array("auth_announce",$auth_fields) && !in_array("auth_delete",$auth_fields) && ($userdata['user_level'] == 0)))
{
$value = 1;
}

switch( $value )
{
case AUTH_ALL:
$auth_user[$key] = TRUE;
$auth_user[$key . '_type'] = $lang['Auth_Anonymous_Users'];
break;

case AUTH_REG:
$auth_user[$key] = ( $userdata['session_logged_in'] ) ? TRUE : 0;
$auth_user[$key . '_type'] = $lang['Auth_Registered_Users'];
break;

case AUTH_ACL:
$auth_user[$key] = ( $userdata['session_logged_in'] ) ? auth_check_user(AUTH_ACL, $key, $u_access, $is_admin) : 0;
$auth_user[$key . '_type'] = $lang['Auth_Users_granted_access'];
break;

case AUTH_MOD:
$auth_user[$key] = ( $userdata['session_logged_in'] ) ? auth_check_user(AUTH_MOD, 'auth_mod', $u_access, $is_admin) : 0;
$auth_user[$key . '_type'] = $lang['Auth_Moderators'];
break;

case AUTH_ADMIN:
$auth_user[$key] = $is_admin;
$auth_user[$key . '_type'] = $lang['Auth_Administrators'];
break;

default:
$auth_user[$key] = 0;
break;
}
}
else
{
for($k = 0; $k < count($f_access); $k++)
{
$value = $f_access[$k][$key];
$f_forum_id = $f_access[$k]['forum_id'];

switch( $value )
{
case AUTH_ALL:
$auth_user[$f_forum_id][$key] = TRUE;
$auth_user[$f_forum_id][$key . '_type'] = $lang['Auth_Anonymous_Users'];
break;

case AUTH_REG:
$auth_user[$f_forum_id][$key] = ( $userdata['session_logged_in'] ) ? TRUE : 0;
$auth_user[$f_forum_id][$key . '_type'] = $lang['Auth_Registered_Users'];
break;

case AUTH_ACL:
$auth_user[$f_forum_id][$key] = ( $userdata['session_logged_in'] ) ? auth_check_user(AUTH_ACL, $key, $u_access[$f_forum_id], $is_admin) : 0;
$auth_user[$f_forum_id][$key . '_type'] = $lang['Auth_Users_granted_access'];
break;

case AUTH_MOD:
$auth_user[$f_forum_id][$key] = ( $userdata['session_logged_in'] ) ? auth_check_user(AUTH_MOD, 'auth_mod', $u_access[$f_forum_id], $is_admin) : 0;
$auth_user[$f_forum_id][$key . '_type'] = $lang['Auth_Moderators'];
break;

case AUTH_ADMIN:
$auth_user[$f_forum_id][$key] = $is_admin;
$auth_user[$f_forum_id][$key . '_type'] = $lang['Auth_Administrators'];
break;

default:
$auth_user[$f_forum_id][$key] = 0;
break;
}
}
}
}

//
// Is user a moderator?
//
if ( $forum_id != AUTH_LIST_ALL )
{
$auth_user['auth_mod'] = ( $userdata['session_logged_in'] ) ? auth_check_user(AUTH_MOD, 'auth_mod', $u_access, $is_admin) : 0;
}
else
{
for($k = 0; $k < count($f_access); $k++)
{
$f_forum_id = $f_access[$k]['forum_id'];

$auth_user[$f_forum_id]['auth_mod'] = ( $userdata['session_logged_in'] ) ? auth_check_user(AUTH_MOD, 'auth_mod', $u_access[$f_forum_id], $is_admin) : 0;
}
}

return $auth_user;
}

function auth_check_user($type, $key, $u_access, $is_admin)
{
$auth_user = 0;

if ( count($u_access) )
{
for($j = 0; $j < count($u_access); $j++)
{
$result = 0;
switch($type)
{
case AUTH_ACL:
$result = $u_access[$j][$key];

case AUTH_MOD:
$result = $result || $u_access[$j]['auth_mod'];

case AUTH_ADMIN:
$result = $result || $is_admin;
break;
}

$auth_user = $auth_user || $result;
}
}
else
{
$auth_user = $is_admin;
}

return $auth_user;
}

?>



Was mach ich den nun????
Danke an Markus67 er hat mindestens 50% anteil an dem funktioniern meines forum
Danke auch an alle anderen
Signaturen dürfen maximal 3 Zeilen lang sein
Benutzeravatar
Markus67
Ehrenadmin
Beiträge: 28346
Registriert: 12.01.2004 16:02
Wohnort: Neuss
Kontaktdaten:

Beitrag von Markus67 »

Hi ...

Welchen MOD willst du denn einbauen?

Markus
Watershine
Mitglied
Beiträge: 34
Registriert: 04.11.2005 17:07
Wohnort: Wächtersbach
Kontaktdaten:

Beitrag von Watershine »

Ich bin kein Supporter und hab hier auch schon zig mal nach Hilfe gefragt daher weiß ich nicht ob ich dir helfen kann, aber:

Wenn ich MODs eingebaut habe und die angegebene Stelle nicht gefunden wurde bin ich so vorgegangen:

1. Überprüft ob ich die richtige Datei geöffnet habe. Wenn ja dann...

2. Nicht versucht nach der ganzen Zeile zu suchen sondern nur nach Teilstücken und dann überprüft ob es dieses teilstück mehrere male gibt. Wenn nicht dann hatte ich meistens die richtige zeile, wenn doch habe ich einfach noch ein Stück mehr von der Zeile kopiert und danach gesucht. Oftmals war es auch so das Code gesucht wurde der in ' ' steht und in meiner PHP Datei wurde er dann aber von " " eingegrenzt. Wenn das auch nicht geholfen hat dann...

3. Überprüft welche MODs ich schon installiert habe. Ob diese MODs ebenfalls veränderungen in der Datei vornehmen die ich gerade bearbeiten will und wenn das der Fall war dann überprüft ob der andere MOD dann evtl. auch genau diese Stelle bearbeitet hat die ich nun finden soll. Es gibt ja einige MODs in denen es heißt: "Finde..." und dann: "Ersetze durch..."

Wenn du das alles schon gemacht hast weiß ich auch nicht weiter. ^^;
Benutzeravatar
franticfreak
Mitglied
Beiträge: 464
Registriert: 14.02.2005 22:18
Kontaktdaten:

Beitrag von franticfreak »

Es ist die shop mod die ich versuche einzubauen
Danke an Markus67 er hat mindestens 50% anteil an dem funktioniern meines forum
Danke auch an alle anderen
Signaturen dürfen maximal 3 Zeilen lang sein
Benutzeravatar
Markus67
Ehrenadmin
Beiträge: 28346
Registriert: 12.01.2004 16:02
Wohnort: Neuss
Kontaktdaten:

Beitrag von Markus67 »

Hi ...

Hast du einen Link zum Download?
Muss da nicht vorher der Cash MOD installiert werden?

Markus
Benutzeravatar
franticfreak
Mitglied
Beiträge: 464
Registriert: 14.02.2005 22:18
Kontaktdaten:

Beitrag von franticfreak »

Den cash mod hab ich drin

Hier hast du den shop mod installer
http://fallinangel.fa.funpic.de/shop_mod261.rar


Ich sehe grad es ist alles auf englisch, gibts dazu auch ne Deutsche sprachdatei?
Danke an Markus67 er hat mindestens 50% anteil an dem funktioniern meines forum
Danke auch an alle anderen
Signaturen dürfen maximal 3 Zeilen lang sein
Bolli
Mitglied
Beiträge: 77
Registriert: 04.10.2005 20:13
Wohnort: Krefeld

Beitrag von Bolli »

hi,

Bist Du sicher, dass Du das Codestück in der auth.php suchen musst? Im gesamten phpBBcode [2.0.18] finde ich den Codeschnipsel nur in der index.php auf Zeile 341.

Grüße
Sollten Ihnen meine Aussagen zu klar gewesen sein, dann müssen Sie mich missverstanden haben. (Alan Greenspan)
Benutzeravatar
franticfreak
Mitglied
Beiträge: 464
Registriert: 14.02.2005 22:18
Kontaktdaten:

Beitrag von franticfreak »

Japp da bin ich sicher,steht so in der anleitung
Danke an Markus67 er hat mindestens 50% anteil an dem funktioniern meines forum
Danke auch an alle anderen
Signaturen dürfen maximal 3 Zeilen lang sein
Antworten

Zurück zu „phpBB 2.0: Mod Support“