Code: Alles auswählen
Allgemeiner Fehler
Failed sending email :: PHP ::
DEBUG MODE
Line : 234
File : emailer.phpManchmal kommt die Nachricht und die PN wird 3x verschickt. Manchmal klappt es wohl auch. Ich jedenfalls kann überhaupt keine Massen-Mail verschicken. Mein Hoster ist HostEurope, der sagt: " Das liegt am Code."Dr.Death hat geschrieben:wenn die Nachricht ab- und zu versendet wird, dann liegt das an deinem Hoster.
Da kümmere ich mich mal zeitnah drumarea57 hat geschrieben:Moin,
schau mal in den FAQ's bei HE, denn du musst die emailer.php ein bisschen anpassen, da HE eine Standardmail adresse im Script haben muss
.Hängt das auch damit zusammen?bekomme diese Meldung nicht nur bei PNs, sondern auch bei normalen Beiträgen. Dafür stehen sie dann gleich viermal da.
Code: Alles auswählen
Ran into problems sending Mail. Response: 501 >: "@" or "." expected after "hovawartforum.de"
DEBUG MODE
Line : 143
File : smtp.phpCode: Alles auswählen
mail ($empfänger, $betreff, $nachricht, $headers, "-f irgendeine_adresse@deinedomain.tld");Code: Alles auswählen
class emailer
{
var $msg, $subject, $extra_headers;
var $addresses, $reply_to, $from;
var $use_smtp;
var $tpl_msg = array();
function emailer($use_smtp)
{
$this->reset();
$this->use_smtp = $use_smtp;
$this->reply_to = $this->from = '';
}
// Resets all the data (address, template file, etc etc to default
function reset()
{
$this->addresses = array();
$this->vars = $this->msg = $this->extra_headers = '';
}
// Sets an email address to send to
function email_address($address)
{
$this->addresses['to'] = trim($address);
}
function cc($address)
{
$this->addresses['cc'][] = trim($address);
}
function bcc($address)
{
$this->addresses['bcc'][] = trim($address);
}
function replyto($address)
{
$this->reply_to = trim($address);
}
function from($address)
{
$this->from = trim($address);
}
// set up subject for mail
function set_subject($subject = '')
{
$this->subject = trim(preg_replace('#[\n\r]+#s', '', $subject));
}
// set up extra mail headers
function extra_headers($headers)
{
$this->extra_headers .= trim($headers) . "\n";
}
function use_template($template_file, $template_lang = '')
{
global $board_config, $phpbb_root_path;
if (trim($template_file) == '')
{
message_die(GENERAL_ERROR, 'No template file set', '', __LINE__, __FILE__);
}
if (trim($template_lang) == '')
{
$template_lang = $board_config['default_lang'];
}
if (empty($this->tpl_msg[$template_lang . $template_file]))
{
$tpl_file = $phpbb_root_path . 'language/lang_' . $template_lang . '/email/' . $template_file . '.tpl';
if (!@file_exists(@phpbb_realpath($tpl_file)))
{
$tpl_file = $phpbb_root_path . 'language/lang_' . $board_config['default_lang'] . '/email/' . $template_file . '.tpl';
if (!@file_exists(@phpbb_realpath($tpl_file)))
{
message_die(GENERAL_ERROR, 'Could not find email template file :: ' . $template_file, '', __LINE__, __FILE__);
}
}
if (!($fd = @fopen($tpl_file, 'r')))
{
message_die(GENERAL_ERROR, 'Failed opening template file :: ' . $tpl_file, '', __LINE__, __FILE__);
}
$this->tpl_msg[$template_lang . $template_file] = fread($fd, filesize($tpl_file));
fclose($fd);
}
$this->msg = $this->tpl_msg[$template_lang . $template_file];
return true;
}
// assign variables
function assign_vars($vars)
{
$this->vars = (empty($this->vars)) ? $vars : $this->vars . $vars;
}
// Send the mail out to the recipients set previously in var $this->address
function send()
{
global $board_config, $lang, $phpEx, $phpbb_root_path, $db;
// Escape all quotes, else the eval will fail.
$this->msg = str_replace ("'", "\'", $this->msg);
$this->msg = preg_replace('#\{([a-z0-9\-_]*?)\}#is', "' . $\\1 . '", $this->msg);
// Set vars
reset ($this->vars);
while (list($key, $val) = each($this->vars))
{
$$key = $val;
}
eval("\$this->msg = '$this->msg';");
// Clear vars
reset ($this->vars);
while (list($key, $val) = each($this->vars))
{
unset($$key);
}
// We now try and pull a subject from the email body ... if it exists,
// do this here because the subject may contain a variable
$drop_header = '';
$match = array();
if (preg_match('#^(Subject:(.*?))$#m', $this->msg, $match))
{
$this->subject = (trim($match[2]) != '') ? trim($match[2]) : (($this->subject != '') ? $this->subject : 'No Subject');
$drop_header .= '[\r\n]*?' . preg_quote($match[1], '#');
}
else
{
$this->subject = (($this->subject != '') ? $this->subject : 'No Subject');
}
if (preg_match('#^(Charset:(.*?))$#m', $this->msg, $match))
{
$this->encoding = (trim($match[2]) != '') ? trim($match[2]) : trim($lang['ENCODING']);
$drop_header .= '[\r\n]*?' . preg_quote($match[1], '#');
}
else
{
$this->encoding = trim($lang['ENCODING']);
}
if ($drop_header != '')
{
$this->msg = trim(preg_replace('#' . $drop_header . '#s', '', $this->msg));
}
$to = $this->addresses['to'];
$cc = (count($this->addresses['cc'])) ? implode(', ', $this->addresses['cc']) : '';
$bcc = (count($this->addresses['bcc'])) ? implode(', ', $this->addresses['bcc']) : '';
// Build header
$this->extra_headers = (($this->reply_to != '') ? "Reply-to: $this->reply_to\n" : '') . (($this->from != '') ? "From: $this->from\n" : "From: " . $board_config['board_email'] . "\n") . "Return-Path: " . $board_config['board_email'] . "\nMessage-ID: <" . md5(uniqid(time())) . "@" . $board_config['server_name'] . ">\nMIME-Version: 1.0\nContent-type: text/plain; charset=" . $this->encoding . "\nContent-transfer-encoding: 8bit\nDate: " . date('r', time()) . "\nX-Priority: 3\nX-MSMail-Priority: Normal\nX-Mailer: PHP\nX-MimeOLE: Produced By phpBB2\n" . $this->extra_headers . (($cc != '') ? "Cc: $cc\n" : '') . (($bcc != '') ? "Bcc: $bcc\n" : '');
// Send message ... removed $this->encode() from subject for time being
if ( $this->use_smtp )
{
if ( !defined('SMTP_INCLUDED') )
{
include($phpbb_root_path . 'includes/smtp.' . $phpEx);
}
$result = smtpmail($to, $this->subject, $this->msg, $this->extra_headers);
}
else
{
$empty_to_header = ($to == '') ? TRUE : FALSE;
$to = ($to == '') ? (($board_config['sendmail_fix']) ? ' ' : 'Undisclosed-recipients:;') : $to;
$result = @mail($to, $this->subject, preg_replace("#(?<!\r)\n#s", "\n", $this->msg), $this->extra_headers);
if (!$result && !$board_config['sendmail_fix'] && $empty_to_header)
{
$to = ' ';
$sql = "UPDATE " . CONFIG_TABLE . "
SET config_value = '1'
WHERE config_name = 'sendmail_fix'";
if (!$db->sql_query($sql))
{
message_die(GENERAL_ERROR, 'Unable to update config table', '', __LINE__, __FILE__, $sql);
}
$board_config['sendmail_fix'] = 1;
$result = @mail($to, $this->subject, preg_replace("#(?<!\r)\n#s", "\n", $this->msg), $this->extra_headers);
}
}
// Did it work?
if (!$result)
{
message_die(GENERAL_ERROR, 'Failed sending email :: ' . (($this->use_smtp) ? 'SMTP' : 'PHP') . ' :: ' . $result, '', __LINE__, __FILE__);
}
return true;
}
// Encodes the given string for proper display for this encoding ... nabbed
// from php.net and modified. There is an alternative encoding method which
// may produce lesd output but it's questionable as to its worth in this
// scenario IMO
function encode($str)
{
if ($this->encoding == '')
{
return $str;
}
// define start delimimter, end delimiter and spacer
$end = "?=";
$start = "=?$this->encoding?B?";
$spacer = "$end\r\n $start";
// determine length of encoded text within chunks and ensure length is even
$length = 75 - strlen($start) - strlen($end);
$length = floor($length / 2) * 2;
// encode the string and split it into chunks with spacers after each chunk
$str = chunk_split(base64_encode($str), $length, $spacer);
// remove trailing spacer and add start and end delimiters
$str = preg_replace('#' . preg_quote($spacer, '#') . '$#', '', $str);
return $start . $str . $end;
}
//
// Attach files via MIME.
//
function attachFile($filename, $mimetype = "application/octet-stream", $szFromAddress, $szFilenameToDisplay)
{
global $lang;
$mime_boundary = "--==================_846811060==_";
$this->msg = '--' . $mime_boundary . "\nContent-Type: text/plain;\n\tcharset=\"" . $lang['ENCODING'] . "\"\n\n" . $this->msg;
if ($mime_filename)
{
$filename = $mime_filename;
$encoded = $this->encode_file($filename);
}
$fd = fopen($filename, "r");
$contents = fread($fd, filesize($filename));
$this->mimeOut = "--" . $mime_boundary . "\n";
$this->mimeOut .= "Content-Type: " . $mimetype . ";\n\tname=\"$szFilenameToDisplay\"\n";
$this->mimeOut .= "Content-Transfer-Encoding: quoted-printable\n";
$this->mimeOut .= "Content-Disposition: attachment;\n\tfilename=\"$szFilenameToDisplay\"\n\n";
if ( $mimetype == "message/rfc822" )
{
$this->mimeOut .= "From: ".$szFromAddress."\n";
$this->mimeOut .= "To: ".$this->emailAddress."\n";
$this->mimeOut .= "Date: ".date("D, d M Y H:i:s") . " UT\n";
$this->mimeOut .= "Reply-To:".$szFromAddress."\n";
$this->mimeOut .= "Subject: ".$this->mailSubject."\n";
$this->mimeOut .= "X-Mailer: PHP/".phpversion()."\n";
$this->mimeOut .= "MIME-Version: 1.0\n";
}
$this->mimeOut .= $contents."\n";
$this->mimeOut .= "--" . $mime_boundary . "--" . "\n";
return $out;
// added -- to notify email client attachment is done
}
function getMimeHeaders($filename, $mime_filename="")
{
$mime_boundary = "--==================_846811060==_";
if ($mime_filename)
{
$filename = $mime_filename;
}
$out = "MIME-Version: 1.0\n";
$out .= "Content-Type: multipart/mixed;\n\tboundary=\"$mime_boundary\"\n\n";
$out .= "This message is in MIME format. Since your mail reader does not understand\n";
$out .= "this format, some or all of this message may not be legible.";
return $out;
}
//
// Split string by RFC 2045 semantics (76 chars per line, end with \r\n).
//
function myChunkSplit($str)
{
$stmp = $str;
$len = strlen($stmp);
$out = "";
while ($len > 0)
{
if ($len >= 76)
{
$out .= substr($stmp, 0, 76) . "\r\n";
$stmp = substr($stmp, 76);
$len = $len - 76;
}
else
{
$out .= $stmp . "\r\n";
$stmp = "";
$len = 0;
}
}
return $out;
}
//
// Split the specified file up into a string and return it
//
function encode_file($sourcefile)
{
if (is_readable(phpbb_realpath($sourcefile)))
{
$fd = fopen($sourcefile, "r");
$contents = fread($fd, filesize($sourcefile));
$encoded = $this->myChunkSplit(base64_encode($contents));
fclose($fd);
}
return $encoded;
}
} // class emailer
?>Code: Alles auswählen
function server_parse($socket, $response, $line = __LINE__)
{
$server_response = '';
while (substr($server_response, 3, 1) != ' ')
{
if (!($server_response = fgets($socket, 256)))
{
message_die(GENERAL_ERROR, "Couldn't get mail server response codes", "", $line, __FILE__);
}
}
if (!(substr($server_response, 0, 3) == $response))
{
message_die(GENERAL_ERROR, "Ran into problems sending Mail. Response: $server_response", "", $line, __FILE__);
}
}
// Replacement or substitute for PHP's mail command
function smtpmail($mail_to, $subject, $message, $headers = '')
{
global $board_config;
// Fix any bare linefeeds in the message to make it RFC821 Compliant.
$message = preg_replace("#(?<!\r)\n#si", "\r\n", $message);
if ($headers != '')
{
if (is_array($headers))
{
if (sizeof($headers) > 1)
{
$headers = join("\n", $headers);
}
else
{
$headers = $headers[0];
}
}
$headers = chop($headers);
// Make sure there are no bare linefeeds in the headers
$headers = preg_replace('#(?<!\r)\n#si', "\r\n", $headers);
// Ok this is rather confusing all things considered,
// but we have to grab bcc and cc headers and treat them differently
// Something we really didn't take into consideration originally
$header_array = explode("\r\n", $headers);
@reset($header_array);
$headers = '';
while(list(, $header) = each($header_array))
{
if (preg_match('#^cc:#si', $header))
{
$cc = preg_replace('#^cc:(.*)#si', '\1', $header);
}
else if (preg_match('#^bcc:#si', $header))
{
$bcc = preg_replace('#^bcc:(.*)#si', '\1', $header);
$header = '';
}
$headers .= ($header != '') ? $header . "\r\n" : '';
}
$headers = chop($headers);
$cc = explode(', ', $cc);
$bcc = explode(', ', $bcc);
}
if (trim($subject) == '')
{
message_die(GENERAL_ERROR, "No email Subject specified", "", __LINE__, __FILE__);
}
if (trim($message) == '')
{
message_die(GENERAL_ERROR, "Email message was blank", "", __LINE__, __FILE__);
}
// Ok we have error checked as much as we can to this point let's get on
// it already.
if( !$socket = @fsockopen($board_config['smtp_host'], 25, $errno, $errstr, 20) )
{
message_die(GENERAL_ERROR, "Could not connect to smtp host : $errno : $errstr", "", __LINE__, __FILE__);
}
// Wait for reply
server_parse($socket, "220", __LINE__);
// Do we want to use AUTH?, send RFC2554 EHLO, else send RFC821 HELO
// This improved as provided by SirSir to accomodate
if( !empty($board_config['smtp_username']) && !empty($board_config['smtp_password']) )
{
fputs($socket, "EHLO " . $board_config['smtp_host'] . "\r\n");
server_parse($socket, "250", __LINE__);
fputs($socket, "AUTH LOGIN\r\n");
server_parse($socket, "334", __LINE__);
fputs($socket, base64_encode($board_config['smtp_username']) . "\r\n");
server_parse($socket, "334", __LINE__);
fputs($socket, base64_encode($board_config['smtp_password']) . "\r\n");
server_parse($socket, "235", __LINE__);
}
else
{
fputs($socket, "HELO " . $board_config['smtp_host'] . "\r\n");
server_parse($socket, "250", __LINE__);
}
// From this point onward most server response codes should be 250
// Specify who the mail is from....
fputs($socket, "MAIL FROM: <" . $board_config['board_email'] . ">\r\n");
server_parse($socket, "250", __LINE__);
// Specify each user to send to and build to header.
$to_header = '';
// Add an additional bit of error checking to the To field.
$mail_to = (trim($mail_to) == '') ? 'Undisclosed-recipients:;' : trim($mail_to);
if (preg_match('#[^ ]+\@[^ ]+#', $mail_to))
{
fputs($socket, "RCPT TO: <$mail_to>\r\n");
server_parse($socket, "250", __LINE__);
}
// Ok now do the CC and BCC fields...
@reset($bcc);
while(list(, $bcc_address) = each($bcc))
{
// Add an additional bit of error checking to bcc header...
$bcc_address = trim($bcc_address);
if (preg_match('#[^ ]+\@[^ ]+#', $bcc_address))
{
fputs($socket, "RCPT TO: <$bcc_address>\r\n");
server_parse($socket, "250", __LINE__);
}
}
@reset($cc);
while(list(, $cc_address) = each($cc))
{
// Add an additional bit of error checking to cc header
$cc_address = trim($cc_address);
if (preg_match('#[^ ]+\@[^ ]+#', $cc_address))
{
fputs($socket, "RCPT TO: <$cc_address>\r\n");
server_parse($socket, "250", __LINE__);
}
}
// Ok now we tell the server we are ready to start sending data
fputs($socket, "DATA\r\n");
// This is the last response code we look for until the end of the message.
server_parse($socket, "354", __LINE__);
// Send the Subject Line...
fputs($socket, "Subject: $subject\r\n");
// Now the To Header.
fputs($socket, "To: $mail_to\r\n");
// Now any custom headers....
fputs($socket, "$headers\r\n\r\n");
// Ok now we are ready for the message...
fputs($socket, "$message\r\n");
// Ok the all the ingredients are mixed in let's cook this puppy...
fputs($socket, ".\r\n");
server_parse($socket, "250", __LINE__);
// Now tell the server we are done and close the socket...
fputs($socket, "QUIT\r\n");
fclose($socket);
return TRUE;
}
?>